Product FAQ

How to activate inverse barcodes of TEEMI 2D scanners?

This code does not work for TM2D-09, TM2D-08, TMCT-80 and TMSL-59.

Please scan the configuration code below to activate inverse and normal barcodes 

Driver's License Data Formatting

The defafult setting of the scanner is to output the driver's license data into a single line. If you need the scanner to output the driver license data into seperate lines, please kindly scan the first two configuration codes below. Thank you.

1. First scan "activate Datamatrix" code

 

2. Scan "driver license data formatting" barcode

 

If you need to output the birth date in the format of MM/DD/YYYY, please scan the barcode below.

If you need to output the birth date, license number or other information only, please kindly send your programming request to support@teemistore.com.

 

How to activate QR code with website address?

If your TEEMI 2D scanner has difficulties to scan QR code with website address, please kindly scan the configuration code below to activate this feature.

How to Activate OCR function of TEEMI 2D Scanners?

Please kindly scan the configuration code below to activate the OCR function. This code only works for TEEMI 2D Scanners.

 

 

enable OCR long code

How to activate the IMB code for TEEMI 2D Scanners?

The Intelligent Mail® barcode (IMb) is used to sort and track letters, cards and flats and offers greater versatility by allowing many services to be requested and embedded within one barcode. The Intelligent Mail barcode combines the data of the existing POSTNET™ and the PLANET Code® barcodes, as well as other data, into a single barcode. 

Please kindly scan the programming barcode below to activate the IMB code.

Activate USB virtual COM Port Feature on 2D Wired Scanners

This only works for T22N-AU, T26N-AU, TMSL-60, TMSL-70, TMSL-72, TMSL-73, TMSL-74.

 How to connect the scanner via USB Virtual COM Port

  1. Install virtual com driver 

  1. After the driver is installed, please plug the scanner into your PC and scan the following barcode to activate. You will hear one short beep after the scanner is configuration correctly for the usb virtual com port.

      3. Check the COM port which the scanner is plugged into

       Your PC/Control Panels/System/Hardware tab/Device Manager/Ports (Com         & LPT)

      4. Open you serial software and start to use

 

How to operate TMSL-55CR TMSL-56CR as a USB virtual COM port?

1. Install virtual com driver 

2. After the driver is installed, please plug the USB Cradle into your PC and scan the following barcode to activate. Please make sure that the scanner is paired to the scanner, the blue led on the cradle will turn on if conneted. You will hear one short beep after the scanner is configuration correctly for the usb virtual com port.  

3. Open you serial software and start to use

How to scan interleaved 2 of 5 old library barcodes?

Please scan this code below to set up. This code does not work with TMCT-10, TMCT-07, TMSL-58, TMSL-75, TMSL-76.

If this code does not help, please kindly send us a clear picture of your book barcodes and advise the data you need our scanner to output.

Automatic Switch between handheld and handsfree mode

Please scan the barcode below to activate the automatic switch feature between handheld and handsfree mode. This code only works with T22N-AU, T26N-AU, TMSL-55CR, TMSL-56CR manufatured after 2023.

How to create configuration codes(prefix and suffix) for our 2D scanners?

  1. First please kindly download and install the barcode creator software over here.

https://drive.google.com/file/d/1KozUOayxtUqR_8gftIFZ-it77kBZMD-T/view?usp=drive_link

  1. Click the barcode symbol and click the blank space to create the configuration code

 

  1. Double click the barcode, a small window will pop out where you can change the data and symbology

 

  1. Go to the barcode and select datamatrix as the symbology

 

  1. Go to the data source and copy the command string into the screen data

 

Contact form