Case of 20 Packs, TEEMI TMSL-56CR QR Bluetooth Barcode Scanner with Wall Mountable USB Cradle and Receiver, 1D 2D Wireless CMOS Screen Scanning PDF417 Data Matrix Stable Bluetooth 5.0 Connection
Case of 20 Packs, TEEMI TMSL-56CR QR Bluetooth Barcode Scanner with Wall Mountable USB Cradle and Receiver, 1D 2D Wireless CMOS Screen Scanning PDF417 Data Matrix Stable Bluetooth 5.0 Connection
- Fast Scanning Ability: 100 frames per second, Improved scanning of curved, wide, poorly printed and damaged barcodes, High speed, omnidirectional reading of 1D, 2D, Postal bar codes and reverse printed bar code on car, support full 2D barcodes like PDF417, MicroPDF417, Data Matrix, Maxicode, QR Code, MicroQR, Aztec, Hanxin
- Long Transfer Range: Bluetooth 5.0 technology, direction bluetooth transfer range can up to 398ft maximum, transfer range with usb cradle or receiver can up to 820ft maximum
- Three Scanning Modes: Trigger scanning mode(press the trigger to scan), continuous scanning mode(LED will stay one all the time to scan) and auto-sensing scanning mode(the LED will be activated when the barcode is close to the scanning window.)
- Inventory Mode with Large Capacity: scan your barcodes around and upload them in batch. wITH 32M internal memory, the scanner can save up to 20,000 barcodes one time.
- Flexible Installation and Online Upgrade: You can mount the usb cradle on the wall or put it on the table. The cradle works as a data receiver, charge station and stand. The bottom page button on the cradle will help you to upgrade the internal software and find the paired connected scanner if you forget where you put it.
Share
- Description
- User Manual
- Q&A
Product Description
2D Bluetooth Barcode Scanner - Moving your barcodes beyond paper
This TMSL-56 scanner is using the latest bluetooth technology, and it is the updated version for TMSL-55. It works with Apple iOS, Android, Window PC and tablets. This cradle can work as a data receiver and charging base, it also can be mounted on the wall or stand on the table as you wish.
NOTE:
1. This scanner is not 100% compatible with square, vend, shopkeep software on iOS devices.
2. If you want to convert the usb cradle to COM port, you can purchase TEEMI serial cable for the USB cradle or activate virtual com port feature.
3. If you want this scanner to read DPM barcodes, please kindly confirm with us before placing the order. Codes, symbols, and text applied directly to a part’s surface (rather than affixed by a label or packaging) are known as Direct Part Marks (DPM). DPM are used widely in industrial part tracking from electronics manufacturing to automotive assembly.
4. This 2D scanner is not good at decoding 1D long barcode around over 10cm. It reads UPS, UPS tracking bills.
No need to scan any configuration code to activate handsfree scanning mode, just put the scanner in the intelligent USB cradle to activate.
Fast Precise Scan and Long Transfer Range
|
|
|
---|---|---|
Symbology Decode CapabilityThis scanner can output the driver license data into one single line by factory default setting. If your software requires the data to be input into several columns, please kindly confirm with the seller first. |
Easily pair with your smart device or the USB cradle or receiverHow to pair the scanner with your device
How to use the scanner with the USB cradle or receiver? Scan the barcode on cradle or receiver, then plug the scanner into your PC, the scanner will send the data to your PC via cradle or receiver. NOTE: The scanner can only be paired with one device one time. If you have several workstations to receive data, you can purchase several scanners. |
Presentation Mode-scan without pressing the triggerPresentation Mode uses ambient light and scanner illumination to detect bar codes. When in Presentation Mode, the LEDs remain dim until a bar code is presented to the scanner, then the aimer turns on and the LEDs turn up to read the code. NOTE:
|
Configurable and Durable
|
|
|
---|---|---|
Rechargeable Lithium ion 2600mAh batteryWith 2600mAh Capacity Battery, it can work 12 hours continuously after full charge. (Test the battery life with a machine, scanning rate one scan per second). If you only do hundreds scans per day, the scanner can work for half month. To charge the device, place it directly on the cradle or connect to any active USB port. The red LED will turn on during charging. The scanner can be fully charged in around 5 to 6 hours. When the battery is low, you will hear three high beeps from the scanner. |
Over 400 configuration options
This TMSL-56 is a BLE base device, it supports GATT(Generic Attribute Profile) mode and Second further development. With device UUID and service ID, your app can access the scanned data very easily. |
Durable DesignThe scanner will survive even if falls down from 5ft off the ground. If you are looking for a durable scanner with good battery endurance, this TMSL-56 would be a good choice. |
|
|
|
---|---|---|
You can select the bluetooth profile mode accroding to your software requirement.
The scanner can upload the data to your serial software under this mode.
The scanner can upload the data to your serial software under this mode. GATT Service UUID needs to be filled while in connection.
The scanned barcode data will be uploaded to IOS, Android , windows or other devices in the form of bluetooth keyboard data. |
1D: UPC/EAN, UPC/EAN with supplementals, Bookland EAN, ISSN, UCC Coupon Extended Code, Code128, GS1-128, ISBT 128, Code 39, Code 39 Full ASCII, Trioptic Code 39, Code 32, Code 93, Code11, Matrix 2 of 5, Interleaved 2 of 5, Discrete 2 of 5, Codabar, MSI, Chinese 2 of 5, GS1 DataBar variants, Korean 3 of 5, ISBT Concat 2D: PDF417, MicroPDF417, Data Matrix, Maxicode, QR Code, MicroQR, Aztec, Hanxin etc. This 2D scanner is not good at decoding 1D long barcode around over 10cm. However It reads UPS, UPS tracking bills. |
Heavy durable USB cradle weighs 0.6lb. When you press the pager button at the back of the cradle, there are audible tones and hand pulsation, therefore you can easily find your scanner. |
1.If your TEEMI 2D scanner has difficulties to scan QR code with website address, how to do?
please kindly scan the configuration code below to activate this feature.
2.How to Activate OCR function of TEEMI 2D Scanners?
Please kindly scan the configuration code below to activate the OCR function. This code only works for TEEMI 2D Scanners.
Enable normal OCR codes
Enable Long OCR codes
3. How to activate the IMB code for TEEMI 2D Scanners?
Please kindly scan the programming barcode below to activate the IMB code.
4. How to program the scanner auto enter after each scan?
Please scan this code to set up.
5. How to turn off the sound of the scanner?
Please scan the codes below to set up.
6. How to activate the feature of automatic switching between handheld and handsfree mode.
Please scan this code below to set up.