TEEMI TMSL-55CR 1D 2D Bluetooth Barcode Scanner with USB Cradle Data Receiver Charge Station, QR Wireless Automatic Omnidirectional Screen Scanning Driver's License, Digital Coupon, Postal and OCR Code
TEEMI TMSL-55CR 1D 2D Bluetooth Barcode Scanner with USB Cradle Data Receiver Charge Station, QR Wireless Automatic Omnidirectional Screen Scanning Driver's License, Digital Coupon, Postal and OCR Code
- Latest Bluetooth 5.0 Technology makes it work with iPhone, ipad, Andriod, Window PC/tablets much more stable, with the cradle, the signal range is up to 250m (820ft). This scanner does not support iOS based POS like Vend, shopkeeper, Square
- High speed, reliable omnidirectional reading of 1D, 2D, Postal or reverse printed codes on screen or paper, able to scan at any direction, support full 2D barcodes like PDF417, MicroPDF417, Data Matrix, Maxicode, QR Code, MicroQR, Aztec, Hanxin, Intelligent Mail Barcode(IMB) on business card, tickets, driver license, machines, courier service bill
- Durable and Larger Capacity 2600 mAh rechargeable battery makes the scanner works longer. The USB cradle works as a data receiver and charge station. Whenever scanner sits in cradle, charging automatically starts. It also holds the scanner in handsfree presentation mode.
- Three Scanning Mode: Trigger Mode, Continuous Scan Mode and Auto-Sensing Mode. With adjustable LED illumination, the scanner can work at night or bright LED condition. With Vibration alert feature, the scanner can work perfectly in quite environment without disturbing you or your customers.
- Configurable: this scanner is able to scan driver license and output the data into one single line or several lines; replace GS separators with printable symbols, output part of one type barcode data like all the characters or digits before comma
Share
- Description
- User Manual
- Q&A
Product Description
Moving your barcodes beyond paper
This TMSL-55CR scanner uses latest Bluetooth 5.0 technology and can work with Apple iOS, Android, Window PC or tablets. The included USB cradle can work as a data receiver and charging base. This scanner with base can be used widely in almost every application.
NOTE: 1.This scanner is not fuly compatible with square, vend, shopkeep software on iOS devices. Some features may be disabled.
2. The included USB cradle is not compatible with old TMSL-55 manufactured before July 2019.
3. If you want to convert the usb cradle to COM port, you can purchase a serial cable for the USB cradle. Please kindly search B078XBX4VP on amazon.
4. If you want this scanner to read DPM barcodes, please kindly confirm with us before placing the order. Codes, symbols, and text applied directly to a part’s surface (rather than affixed by a label or packaging) are known as Direct Part Marks (DPM). DPM are used widely in industrial part tracking from electronics manufacturing to automotive assembly.
5. This new version TMSL-55 has Vibration function for successful detection and better scanning performance. The White LED indicates the battery consumption of the scanner. The USB cradle has a pager button which can help you to find the paired scanner.
|
|
|
---|---|---|
Symbology Decode CapabilityThe scanner can output the driver license data into one single line by factory default setting. If your software requires the data to be input into several columns, please kindly confirm with the seller first. Thank you. 1D: UPC/EAN, UPC/EAN with supplementals, Bookland EAN, ISSN, UCC Coupon Extended Code, Code128, GS1-128, ISBT 128, Code 39, Code 39 Full ASCII, Trioptic Code 39, Code 32, Code 93, Code11, Matrix 2 of 5, Interleaved 2 of 5, Discrete 2 of 5, Codabar, MSI, Chinese 2 of 5, GS1 DataBar variants, Korean 3 of 5, ISBT Concat 2D: PDF417, MicroPDF417, Data Matrix, Maxicode, QR Code, MicroQR, Aztec, Hanxin etc. |
Easily pair with your smart device or the USB cradleHow to pair the scanner with your device
How to use the scanner with the USB cradle? Follow the manual to pair the scanner with the cradle, then plug the scanner into your PC, the scanner will send the data to your PC via cradle |
Presentation Mode-without pressing the trigger of the scannerPresentation Mode uses ambient light and scanner illumination to detect bar codes. When in Presentation Mode, the LEDs remain dim until a bar code is presented to the scanner, then the aimer turns on and the LEDs turn up to read the code. NOTE:
|
|
|
|
---|---|---|
Durable DesignWith the thick hard rubber, the scanner is much more durable and resist shocks and drops. The scanner will survive even if falls down from 1.5m off the ground. If you are looking for a durablescanner with good battery endurance, this TMSL-55 would be the best choice. |
Less Charge and Long WorkingWith 2500mAh Capacity Battery, it can work 48 hours continuously after full charge. (Test the battery life with a machine, scanning rate one scan per second). If you only do hundreds scans per day, the scanner can work for half months. The red LED will turn on during charging and turn off after fully charged. The scanner can be fully charged in around 2.5 hours. When the battery is low, you will hear high short beeps from the scanner. |
Reading dotWith this aiming dot, you can make sure the scanner is aimed at the correct barcode on the sheet – this greatly increases the chance of reading the correct one. With powerful strong LED light, you can use the scanner even in the dark. |
|
|
|
---|---|---|
You can select the bluetooth profile mode accroding to your software requirement.
The scanner can upload the data to your serial software under this mode.
The scanner can upload the data to your serial software under this mode. GATT Service UUID needs to be filled while in connection.
This is the default setting. You can upload the data to your notepad. |
Our 2D barcode imager scanner features reading 2D and screen barcodes well. Some barcode type may be disabled by factory default setting, please kindly enable it before scan. If your barcode is 1D long linear type over 4inches, you can consider our TMCT-10. |
To use this function, please kindly make sure that the scanner is paired with the cralde. Pressing the pager button on the cradle, you can easily find the scanner. |
TMSL-55CR | TMSL-54CR | Replacement battery | TMSL-70 | T22N-AU with stand | TMCT-10 | |
---|---|---|---|---|---|---|
Connectivity Technology | Bluetooth 5.0 | Bluetooth 5.0 | for TMSL-55CR | USB wired | USB wired | Bluetooth 3.0 + USB wired |
Decoding Rate | 120 Frame per second | 100 Frame per second | Rechargeable | 120 Frame per second | 60 Frame per second | 200 times/s |
1D or 2D scanner | 1D&2D | 1D&2D | 2600mAh | 1D&2D | 1D&2D | 1D |
support paper or screen barcodes | Paper & Screen | Paper & Screen | ---- | Paper & Screen | Paper & Screen | Paper |
Scanning Technology | 2D CMOS Imager | 2D CMOS Imager | --- | 2D CMOS Imager | 2D CMOS Imager | Laser |
Support Moving barcodes | No | No | --- | Yes | No | No |
Transfer distance | 328ft (100m) outdoors in Bluetooth Mode, 250m (820ft) outdoors with the USB Cradle | 328ft (100m) outdoors in Bluetooth Mode, 250m (820ft) outdoors with the USB Cradle | --- | 2ft wired | 2ft wired | Max 196ft |
Hands-free mode | ✓ | --- | --- | ✓ | ✓ | ✓ |
1.If your TEEMI 2D scanner has difficulties to scan QR code with website address, how to do?
please kindly scan the configuration code below to activate this feature.
2.How to Activate OCR function of TEEMI 2D Scanners?
Please kindly scan the configuration code below to activate the OCR function. This code only works for TEEMI 2D Scanners.
Enable normal OCR codes
Enable Long OCR codes
3. How to activate the IMB code for TEEMI 2D Scanners?
Please kindly scan the programming barcode below to activate the IMB code.
4. How to program the scanner auto enter after each scan?
Please scan this code to set up.
5. How to turn off the sound of the scanner?
Please scan the codes below to set up.
6. How to activate the feature of automatic switching between handheld and handsfree mode.
Please scan this code below to set up.