TMSL-57CR White

Bluetooth 5.0 technolog - More stable and Longer Transfer Distance

How to pair the scanner with your device via bluetooth

1. Disconnect the USB cradle

2. Scan the pairing barcode on the manual

3. Turn on the bluetooth of your device and then search our scanner to connect

4. The scanner will beep when it connects with your device

5. Open a notepad or your editable software, place the cursor in and then start to scan

Easy to use, Plug and Play

The scanner is paired with the usb cradle in the package by factory default setting. You can plug the cradle into your PC, open your software and then start to scan your barcodes.

It's also easy to pair the scanner with the cradle, just scan the address code at the back of the cradle.

This is ideal solution for those old PCs or POS without bluetooth feature.

High quality USB cradle

With high quality steel hingle, the cradle can hold the scanner in the position stable.

With 85° adjustable angle, you can freely adjust the cradle for better scan under handsfree mode.

1. You can double click the trigger very fast to pop out or hide the onscreen keyboard of your iphone, ipad ios device.
2. You can also scan the configuration code to bring out the onscreen keyboard.

With built-in 2600mAh Capacity Rechargable Battery, it can work 24 hours continuouslyafter full charge. (Test the battery life with a machine, scanning rate one scan per second).

When the battery is low, you will hear three high beeps from the scanner.

When you press the pager button at the back of the cradle, there are audible tones and hand pulsation, therefore you can easily find your scanner.

Our 2D barcode imager scanner features reading 2D and screen barcodes well.

Some barcode type may be disabled by factory default setting, please kindly enable it before scan. If your barcode is 1D long linear type over 4inches, you can consider our TMCT-10.

Our TMSL-57CR supports following barcode types:

1D: UPC/EAN, UPC/EAN with supplementals, Bookland EAN, ISSN, UCC Coupon Extended Code, Code128, GS1-128, ISBT 128, Code 39, Code 39 Full ASCII, Trioptic Code 39, Code 32, Code 93, Code11, Matrix 2 of 5, Interleaved 2 of 5, Discrete 2 of 5, Codabar, MSI, Chinese 2 of 5, GS1 DataBar variants, Korean 3 of 5, ISBT Concat

2D: PDF417, MicroPDF417, Data Matrix, Maxicode, QR Code, MicroQR, Aztec, Hanxin etc.

• Add characters, digits before and after each scan.
• Mute the scanner if your working environment is quite and you don't want to disturb others
• You can apply Enter or tab command key as suffix after each scan.
• Phrase or edit the output data
• Replace non-printable characters in Datamatix with printable symbols
• Output PDF417 driver license barcode into some single line or several lines or output part of information like name or birth date only
• Sound Adjustment
• LED illumination Change

You can select the bluetooth profile mode accroding to your software requirement.

• Bluetooth SPP(serial port profile):

The scanner can upload the data to your serial software under this mode.

• Bluetooth GATT(Generic Attribute Profile)

The scanner can upload the data to your serial software under this mode. GATT Service UUID needs to be filled while in connection.

• Bluetooth HID

When connected to the Bluetooth HID service, the scanned barcode data will upload to IOS, Android , windows or other devices in the form of bluetooth keyboard data. This is the default setting.

If the scanner is connected to your device via the usb cradle, you can upload the data to your serial software via usb virutal com port.